3 Spray Large Hand Held Shower Head - saves water with no loss of power

Save up to 60% of your shower water and energy costs with these amazing water saving replacement shower heads. If you have a power shower, combi boiler, condensing boiler or a dedicated shower pump, these DEFRA approved water saver replacement flowpoint shower heads are guaranteed to cut down on the water the shower uses, and so save you on water and energy bills.

They're easy to fit to any standard shower hose, and you won't notice any loss of shower performance - a mechanism inside the head reduces the flow but maintains the power so you still get a forceful full shower feel.

Do a quick test* to see if you'll save water by using one of these water saving shower heads, then...To order, click on add to basket, or read on for more information.

click here to bookmark this page so you can easily find it again

Price: £19.99 incl. VAT

Quantity:

For help and advice, or to order over the phone,
please call 0800 288 8970.

More information

Quick Test to see if you could save money with a flowpoint shower head

1. You will need a household bucket which should hold a minimum 9 litres (2 gallons), and a stop watch or clock with a second hand.
2. Put the bucket in the bath or the shower, and run the shower at its normal setting into the bucket for one minute, and then stop.
3. If the bucket fills and overflows in less than a minute, your shower is discharging water at a rate in excess of 9 litres (2 gallons) per minute and depending on the time left to run on the clock, probably in excess of 14 to 16 litres (3 to 3.5 gallons) per minute.
4. A Flowpoint shower head is rated at around 7 to 8 litres per minute at normal domestic shower pressure, so you will save energy, water and money by fitting one!

Please note: A water and energy saving replacement flowpoint shower head is NOT suitable for use with electric showers or Venturi showers.

Features
* Chrome handle with soft rubber inset ergonomically shaped
* Large 103mm diameter dial setting easy turn shower head
* 3 spray setting: Full Spray, Massage, Aeration
* Self cleaning with rub down nozzles
* Standard shower hose connection 1/2" thread
* Life time manufacturer guarantee

Did You Know
* In a typical household bathing accounts for 20% of annual water usage.
* An average bath uses around 80 litres of water, but a power shower can use more than this and in some cases up to 25 litres per minute.
* A five minute shower can use up to 125 litres.
* Using a Flowpoint shower head can save the equivalent of 63 litres of clean drinking water per shower!

This product usually ships within 24 hours. Standard UK delivery cost is £3.95.

Not what you're after?
View all the eco products in our water saving devices section, or click on any of the links on the left hand side to see more.